Ergonomic Playground Equipment and Shock-Absorbing Safety Flooring
We design and construct premium children's play areas. Utilizing EN 1176 compliant multi-activity play stations, EPDM wet-pour safety floors, swings, slides, climbers, and non-toxic UV-stabilized materials, we build safe and colorful play spaces.
Designing a children's play area requires high structural integrity, non-toxic UV-stabilized materials, and shock-absorbing safety flooring to prevent injuries from falls.
Elite International Sports provides turnkey playground design and installation services. Standard metal structures rust, chip sharp paint flakes, and lack shock cushioning under slides and swings. We supply multi-activity play stations built with galvanized steel posts coated in non-toxic powder finishes, combined with UV-stabilized LLDPE plastic slides and swings.
Our play zones feature seamless EPDM wet-pour safety floors. We design the floor thickness based on the Critical Fall Height (CFH) parameters of the tallest slide, using Head Injury Criterion (HIC) calculations to absorb impact, complying with EN 1176 and EN 1177 safety codes.
Beyond the physical swings and slides, our setups include sensory panels, rope climbers, and toddler zones, helping municipal parks, school boards, and residential complexes build safe, colorful, and durable play spaces.
LLDPE plastic slides and swings mounted over shock-absorbing EPDM safety flooring.
We manage the entire project lifecycle, from layout mapping and equipment selection to subgrade preparation, EPDM flooring installation, and equipment assembly.
The engineering of a safe playground begins with concrete base preparation. We cast a stable subfloor with proper slope parameters to prevent rainwater accumulation. We lay a dual-layer seamless EPDM rubber floor over the concrete, securing it with polyurethane binders.
The multi-activity play stations are built with galvanized steel structural posts, bolted deep into concrete using anchor fasteners. All structural connections are covered with protective plastic caps to prevent scratch hazards, and all slide components feature smooth joint seams.
To prevent fall injuries, we plan safety zones around swings and slides, maintaining a minimum clearance boundary of 1.5 to 2.0 meters, free of hard obstacles.
Modular play systems featuring slides, climbers, tunnels, and panels, designed for various child age categories.
Seamless rubber cushioning flooring designed with custom patterns and thickness profiles to absorb fall impacts.
Heavy-duty galvanized steel support posts coated in non-toxic polyester powders to prevent outdoor corrosion.
High-strength rotational molded polyethylene components mixed with UV stabilizers to resist sun chalking.
Specialized security bolts and screw fittings that require specific tools to loosen, preventing public tampering.
Sensory panels, music panels, and ground-level gears designed to support tactile play for children of all abilities.
Layouts designed for high-capacity group play in primary schools. Features structured climbing towers, rope bridges, and high-impact EPDM safety flooring.
Vandal-resistant outdoor playground systems for public parks and societies. Features heavy galvanized post steel and UV-stabilized LLDPE components.
Play layouts designed for early child development (ages 2 to 5). Focuses on low climbing heights, soft play panels, and sensory activity tables.
We manage the entire construction process from site inspection to final handover, ensuring every step meets our strict quality standards.
We work with the client to determine playground themes, age ranges, capacity needs, and site boundaries.
We check site drainage levels and concrete subfloor slope before laying the seamless rubber flooring.
We check playground heights against EN 1176 rules, planning fall safety zones around swings.
We model the play stations in 3D, design EPDM floor patterns, and optimize safety clearances.
We detail the anchor bolts, support steel frame sizes, machine spacing, and safety gate layouts.
We calculate static and dynamic loads for concrete steps and steel brackets under weight stress.
We select high-grade steel, polyurethane padding, high-tensile cables, and DMX-controlled LED fixtures.
We secure machines, align pulley tracks, test cable tension levels, and mount protective steel guards.
We test mechanical movement pathways, check weight stack travel, and check cable safety loads.
We run a final safety walk-through, checking bolt torque levels, cable tension, and stack guards.
We hand over the stadium seating layout, along with maintenance manuals and safety certifications.
High-grade solvent-free polyurethane binders used to mix and bond SBR and EPDM rubber granules, ensuring durability.
Virgin EPDM rubber granules mixed in colors, offering high UV resistance and excellent elasticity to prevent cracking.
Hot-dip galvanized steel posts (minimum 114mm diameter) providing structural safety in outdoor parks.
Rotational molded food-grade LLDPE plastics. Resistant to sun chalking and structural cracking.
Stainless steel anchor bolts. These secure the main columns to concrete foundations against wind loads.
Soft injection-molded polyethylene covers. These wrap metal bolt heads to prevent scratches.
| Parameter | Value / Specification | Standards Compliance |
|---|---|---|
| EPDM Floor Thickness | 36mm to 50mm (dependent on slide fall heights) | EN 1177 (Impact attenuating floors) |
| EPDM Polyurethane Binder | 1:6 ratio polyurethane to EPDM granules (MDI base) | EN 1177 certified |
| Support Post Material | Galvanized Steel Tube (114mm diameter, 3.0mm thickness) | EN 1176 structural strength codes |
| Plastic Components | Rotomolded LLDPE with UV grade 8 resistance | EN 1176 non-toxicity & safety codes |
| Critical Fall Height (CFH) | Up to 2.5 meters (cushioned by EPDM floor) | EN 1177 HIC (head injury criteria) |
| Fastener Fittings | Stainless steel Grade 304 safety fasteners | EN 1176 tamper-proof hardware codes |
| Expected Service Life | 8 to 12 Years (outdoor park weathering) | Design life guidelines |
| System Warranty | 2 Years comprehensive warranty | Standard project guidelines |
Fitted to meet EN 13200 parameters, ensuring safe exit access widths and high-load safety guardrails to protect spectators.
The UV-stabilized materials and hot-dip galvanized steel brackets prevent chalking, rust, and cracking under hot sun and heavy rain.
Our retractable bleacher systems slide away against the wall, allowing you to use court space for multiple sports.
Tip-up gravity hinges widen pathways naturally when empty, easing crowd movements during matches.
Blow-molded double-skin structures resist high impacts, scratching, and vandalism in public arenas.
The curved seat shapes support proper posture, ensuring a comfortable experience during long matches.
Elite children's play areas require strict compliance with safety codes. Our playground equipment is designed and constructed to meet **European Standards EN 1176** (Playground equipment) and **EN 1177** (Impact attenuating surfacing).
EN 1176 and EN 1177 parameters define fall safety margins, post loads, non-toxicity of plastic materials, and EPDM thickness parameters. Satisfying these specifications is necessary to ensure safety in public parks and schools.
Our structural and chemical systems are tested by third-party inspectors to ensure compliance with playground codes, providing a safe, durable, and code-compliant play environment.
Following a standard maintenance routine preserves the finish and keeps the playground posts stable for years.
Checking swing chain links weekly, washing plastic components, and sweeping debris.
Checking post anchor bolt torque, evaluating steel powder finishes, and inspecting EPDM wear.
Replacing old metal swings with plastic rotomolded panels, repairing EPDM tears, and adding sensory elements.
Our engineers bring over 15 years of experience in structural safety design and seating layout installation.
We import certified, high-impact HDPE chairs and galvanized support brackets directly from leading manufacturers.
We handle everything—from sightline calculations and bracket anchoring to chair mounting, guardrails, and walkway codes.
Calculating safety clearances, developing detailed layout schematics, and planning anchor specifications.
Drilling concrete floor plates, securing base frames, tensioning cables, and fitting landing mats.
Checking cable tension levels, safety walk-through, verifying landing shock parameters, and equipment handover.
Engineered for children's safety, structural durability, EPDM fall absorbing properties, and EN 1176 standards.
